Technical Review
Correctly Wiring E3D’s V6 or Volcano Heater Block to the Artillery Sidewinder X1
If your upgrade includes changing the stock heater block to E3D’s V6 or Volcano, follow this guide to properly connect the thermistor and heater cartridge to the X1. While soldering will work to get things going, when you have the option to crimp, it is the preferred method. Crimping is mechanically better than soldering, this is a fact. I will take you through what’s needed to properly connect your new heater block to the X1.
Upgrading the Sidewinder X1 with Big Tree Tech’s SKR V1.4 Turbo 32-Bit Board
Installing Fulament’s Hemera Mount on the Sidewinder X1
Choosing the right bed surface
BMG Sidewinder Conversion Guide / Review
