Free USA shippingOrders before 2pm ship same day!
Hassle-free returns30-day postage paid returns
4 products
Fula-Flex 2.0
Check out the full listing here: https://products.fulament.com/
|
160mm x 130mm
|
165mm x 165mm
|
|
220mm x 220mm
|
235mm x 235mm
|
|
254mm x 203mm
|
254mm x 203mm
|
|
255mm x 245mm
|
258mm x 230mm
|
|
300mm x 300mm
|
305mm x 235mm
|
|
310mm x 310mm
|
320mm x 310mm
|
|
330mm x 330mm
|
340mm x 325mm
|
|
355mm x 275mm
|
355mm x 355mm
|
|
377mm x 370mm
|
410mm x 410mm
|
|
470mm x 470mm
|
510mm x 510mm
|
You couldn't pay me to go back to using a glass bed after using the Fulla-Flex 2 sided bed! PETG sticks right to the textured side no issues with warped corners or any warping at all. The smooth side is just as great for PLA, after the print is done, FLEX and it pops right off! Pick off the skirt and wipe with IPA, its ready to go again.
OMG this makes my life so much easier! I was using mirror covered with a sheet from another manufacturer.,, their item worked brilliantly but it stuck TOO well and getting large flat items off the surface was a PITA… now I get the same ‘stick,’ a smoother finish, and now I don’t have to break my fingers and tools to get my prints off… also, magnetic base and sheet combined are lighter so it’s less wear and tear on my machine and less ringing in my prints with the 310x310 size… SO glad I found this!!
Fula-Flex: Resin Edition
|
102mm x 59mm
|
124mm x 70mm
|
|
130mm x 72mm
|
130mm x 80mm
|
|
132mm x 83mm
|
135mm x 75mm
|
|
135mm x 80mm
|
138mm x 78mm
|
|
138mm x 85mm
|
140mm x 84mm
|
|
142mm x 90mm
|
150mm x 150mm
|
|
192mm x 120mm
|
192mm x 126mm
|
|
195mm x 122mm
|
196mm x 126mm
|
|
198mm x 120mm
|
200mm x 125mm
|
|
202mm x 128mm
|
219mm x 140mm
|
|
225mm x 145mm
|
232mm x 141mm
|
|
286mm x 165mm
|
294mm x 168mm
|
|
305mm x 177mm
|
368mm x 219mm
|
I bought a plate for my Mars P. I did not print the spacer needed before attempting to install said plate. In the process of removing the plate so I could print the spacer I messed up the magnet. I reached out to Fulament and was pleasantly rewarded with a replacement magnet at a discount.
Since I have the spacer now and the build plate is installed it has already been doing work. Anyone looking for and easier way to remove prints, THIS IS IT!
The product itself is great, the customer service is beyond great! Cannot go wrong here.
This has saved my frustration with getting prints off the plate. I am only wishing I had gotten the 2nd Flex-plate, as I cannot seem to find a way to order just 2-3 of those without the magnet.
This is my second resin flex plate and honestly it is a must buy for any sla printer magnet is quite strong it does move at all when printing and it hasn't gone loose prints stick very well to build plate and the easy to get them off the plate
I now own 3 fula-flex plates for my Phrozen Sonic Mini printers, and I couldn't operate without them. Gone are the days of using brute force to remove my builds from the build plate...a process that typically resulted in some degree of damage to the build. Now the removal process only takes a few seconds and ensures that the build is protected. Considering the very reasonable cost, this is easily one of the best investments I've made. My only advice is to make sure that you sand the top and bottom surface of the spring steel with sandpaper...as this has helped with keeping the spring steel securely in place on the magnet, as well as ensuring that your builds stick to the plate.
Fulament Replacement High Temperature Magnetic Sheet
Fula-Flex: Resin Edition Replacement Magnets
|
102mm x 59mm
|
124mm x 70mm
|
|
130mm x 72mm
|
130mm x 80mm
|
|
132mm x 83mm
|
135mm x 75mm
|
|
135mm x 80mm
|
138mm x 78mm
|
|
138mm x 85mm
|
140mm x 84mm
|
|
142mm x 90mm
|
150mm x 150mm
|
|
192mm x 120mm
|
192mm x 126mm
|
|
195mm x 122mm
|
196mm x 126mm
|
|
198mm x 120mm
|
200mm x 125mm
|
|
202mm x 128mm
|
219mm x 140mm
|
|
225mm x 145mm
|
232mm x 141mm
|
|
286mm x 165mm
|
294mm x 168mm
|
|
305mm x 177mm
|
368mm x 219mm
|
