I now own 3 fula-flex plates for my Phrozen Sonic Mini printers, and I couldn't operate without them. Gone are the days of using brute force to remove my builds from the build plate...a process that typically resulted in some degree of damage to the build. Now the removal process only takes a few seconds and ensures that the build is protected. Considering the very reasonable cost, this is easily one of the best investments I've made. My only advice is to make sure that you sand the top and bottom surface of the spring steel with sandpaper...as this has helped with keeping the spring steel securely in place on the magnet, as well as ensuring that your builds stick to the plate.
Without even using the product i know this will be an amazing product simple because the fact that you will never have to chip off your part because of how well it stuck. Just a little bend and BOOM part comes off. The only downside is that the m3 screens that hold the z endstop are too short with the spacer in thingiverse, if they could include it or leave a link for it in the thingiverse page that would be amazing.
Make sure you get the spacer file off thingverse and 2 small 10-12 mm m3 screws to attach spacer! This plate is awesome! Printed my base's directly to the build plate no scraping. I just took off the plate and they fell off! Jaw drop! Minis just literally popped into my cleaning bin did not have to move the plate at all. I got this as my large printer does all the heavy lifting and wanted to keep little guy in service doing bases. Printed flat on plate just to see. Popped right off! Now if you'd sell just the plate for a spare hint hint! I use a Anycubic Photon metal vat on my Elegoo mars 2 pro I had to turn the tab around to the back of the build plate and off she goes! 140mmx84mm fits perfectly!
Overall I am extremely happy with the plate. I had a question about the plate and it was address extremely quickly. The only issue I have seen and not really an issue more of a personal item is the company name on both sides. This has only been an issue when I was doing a test exposure as the name showed on the print however normal prints have been fine. I mentioned this to support team and it has been noted and I was not the only one to mention this. I have had zero issue with my prints sticking to the plate and the magnet is extremely strong. I would highly recommend this product and looking forward to order more items from them.
I have used flex plates on my FDM printers since I first started. As soon as I saw them available for my resin printers I ordered one right away. The first one I purchased was from another company only because it was available before Fulament had announced theirs available for sale. Now that I have received the Fulament version I have been able to compare the two. With the Fulament plate you can tell that it cleaner both on the surfaces and the edges than the other flex plate that I have. I have not had any issues with this plate and models sticking to the build plate. I used the same code to run on this plate that wasn't sticking to other and it printed with no issues.
Support has always been one of the things that I have valued most about dealing with the team at Fulament. Any help that I have needed they have gone out of their way to support their products.
This thing has been an awesome addition to my new magnetic aluminum bed. Easy leveling and great adhesion. I’ve even managed to go 3-4 prints before cleaning the bed with isopropyl with no peeling or curling (thou I can’t guarantee those results for you!)
I have four of the dual sided plates for my printers. I had purchased several other plates some cheaper, and some more expensive than Fulaments, however this one has by far outperformed the others (Wham Bam, Creality).
The surface both stuck well without having to use hairspray, glue or other to get print stick. Prints released easily from the plate. The surface has held up well after almost of year of constant use, and still remains flat. Other flex plates I have had to use binder clips on the edges with large prints because the flex plate was not sticking well enough to the magnetic bed, and would curl up on the edges. I have not had that same issue with the Fulament flex plate.
I am absolutely impressed with the flex bed, filament adheres to it well and pops off the plate easily. I have been using mine almost every day just over a year now, and the plate has still remain flat, and has not warped. I purchased one to try it out and immediately purchased another for my second printer.
When I first started in FDM 3D printing there was a lot of hype about flex plates especially like Wham Bam's. I was nervous at first to purchase this one but I decided to take a leap of faith based on the great feedback and experiences people had with it in Facebook Forums. I can tell you that it was the BEST upgrade that I ever did to my stock printers!! No more scrapping the glass bed trying to pry parts off or having to wait until the bed cools to remove a part. These sheets effortlessly release models with a simple bend. After a week of using one, I ended up getting one for my other fdm printer and eventually even my resin printer. Don't let the competitive price fool you, this is a quality made product and a company that truly stands behind their products and service.
I got the Double sided Fula-flex 1.0 at February 2020 I believe. I was exited from the moment I bought it and I still am excited to be having it. When you print anything in print surface you usually have to wait for the bed to cool down or use a scraper that make your print bed so dirty. With this you just have to flex and it comes off. For the adhesion, it was really good for few months then it started to warp. But I asked the customer service and they recommended me to increase the temp and it never warped again! So definitely good adhesion and good customer service. And this is for the 1.0 so this should be even better. I would totally recommend it.
This thing has worked great for me from install to current day. It prints smoothly and maintains even temperature on long and short prints alike.