Fula-Flex 2.0

I have four of the dual sided plates for my printers. I had purchased several other plates some cheaper, and some more expensive than Fulaments, however this one has by far outperformed the others (Wham Bam, Creality).

The surface both stuck well without having to use hairspray, glue or other to get print stick. Prints released easily from the plate. The surface has held up well after almost of year of constant use, and still remains flat. Other flex plates I have had to use binder clips on the edges with large prints because the flex plate was not sticking well enough to the magnetic bed, and would curl up on the edges. I have not had that same issue with the Fulament flex plate.

I am absolutely impressed with the flex bed, filament adheres to it well and pops off the plate easily. I have been using mine almost every day just over a year now, and the plate has still remain flat, and has not warped. I purchased one to try it out and immediately purchased another for my second printer.

When I first started in FDM 3D printing there was a lot of hype about flex plates especially like Wham Bam's. I was nervous at first to purchase this one but I decided to take a leap of faith based on the great feedback and experiences people had with it in Facebook Forums. I can tell you that it was the BEST upgrade that I ever did to my stock printers!! No more scrapping the glass bed trying to pry parts off or having to wait until the bed cools to remove a part. These sheets effortlessly release models with a simple bend. After a week of using one, I ended up getting one for my other fdm printer and eventually even my resin printer. Don't let the competitive price fool you, this is a quality made product and a company that truly stands behind their products and service.

I got the Double sided Fula-flex 1.0 at February 2020 I believe. I was exited from the moment I bought it and I still am excited to be having it. When you print anything in print surface you usually have to wait for the bed to cool down or use a scraper that make your print bed so dirty. With this you just have to flex and it comes off. For the adhesion, it was really good for few months then it started to warp. But I asked the customer service and they recommended me to increase the temp and it never warped again! So definitely good adhesion and good customer service. And this is for the 1.0 so this should be even better. I would totally recommend it.