IMPROVEMENTS OVER V1.0
| Technical Specs | Fula-Bed V.2 | Fula-Bed V.1 |
| Flatness | 0.15mm | 0.20mm |
| Magnets | x55 N35UH | x36 N35SH |
| Max Temperature | 150°C | 120°C |
| Heat Treated | Yes | No |
| Anodization | Yes | No |
| Grounding Cable | Yes | No |
| Flex Plate Alignment Pins | Yes | No |
| Built-in Strain Relief | Yes | No |
TECH SPECS
- Heat treated T6-6061 Aluminum
- 5mm thick
- 0.15mm flatness, individually tested
- N35UH Magnets (Rated up to 150°C)
- Plate Dimensions: 320mm x 310mm
- Printing Dimensions: 300mm x 300mm