Most FDM printing failures occur at the bed, with parts detaching or warping mid-print, causing catastrophic failure. It is usually caused by an uneven printing platform or uneven heat distribution. The new Fulament Fula-Bed aims to fix all of that, featuring 55 high-temperature N35UH magnets, a 0.15mm flatness guarantee, flex plate alignment pins, and built-in cable strain relief, designed to increase the reliability of prints and the longevity of your printer. Fula-Bed aims to help you feel confident in your printer succeeding when it comes to challenging prints, whether it’ll take multiple days, span the entire bed, or use a high-temperature material.
Fula-Bed will mount to the X2 correctly and make correct use of the flex plate pins.
Fulament Upgraded Heater is not compatible with the X2
The strain relief tab will be in the incorrect position for the X2
The last time our aluminum bed was in stock, we sold 650 units in just a few weeks and have been out of stock for months. We are using pre-orders as a tool to help us project inventory for each size and as a way to build a rolling production schedule. Pre-orders will allow us to consistently maintain healthy stock levels for the future.
HOW WILL PRE-ORDERS WORK?
We plan to keep pre-orders open on a rolling "wave" basis. Each wave has a certain number of slots available and an estimated delivery time. The earlier the wave, the earlier the delivery time! We will continuously update what wave number we are currently taking orders on.
We are working around the clock to ensure that the Fula-Bed will reach you on time, but we will not sacrifice quality for speedier delivery. We want to make a product that is worth waiting for! While we have planned and do not foresee any delays, supply chains are in a very tough spot right now, and delays are possible. We will do our due diligence in updating this sheet and customers on the production status, good or bad.
IMPROVEMENTS OVER V1.0
Flex Plate Alignment Pins
Built-in Strain Relief
Heat treated T6-6061 Aluminum
0.15mm flatness, individually tested
N35UH Magnets (Rated up to 150°C)
Plate Dimensions: 320mm x 310mm
Printing Dimensions: 300mm x 300mm
Free shipping on all U.S orders above $65. International shipping and customs fees calculated at checkout. 30-Day risk free, no questions asked, returns on all products still in the original packaging. Our #1 goal is to make sure you are a satisfied customer. Ever have a problem? Just reach out to our support team!
Rest assured, we stand behind our products! We want you to be confident in each and every Fulament purchase knowing you are protected. Fulament products (except consumables) are warranted to be free from defects in material & manufacturing for one year from the original date of purchase when used under normal conditions and for the purpose intended. Click here to learn more about our Fulament Warranty
We source each plate within a 0.15mm flatness. After milling the pockets for the magnets, each plate is then flattened again and heat-treated, ensuring it will not warp throughout thousands of heat cycles.
Using N35UH magnets, resistant up to 150°C, the new Fula-Bed securely grips your flex plate, even at super high temperatures, while providing a tactile snap that is truly addicting.
Designed specifically for each printer, Fula-Bed has built-in cable strain relief, ensuring your heater stands the test of time and built-in flex plate alignment pins, allowing you to quickly line up your flex plate.
No more printing on a bowl!
My stock glass bed was fairly warped, with 0.4mm between high & low points. Heated uneven, hot in the center & barely warm on the edges.
Fulament's aluminum bed not only solves those issues, but I really like the aesthetic of the aluminum bed & flex plate. 10/10
Absolutely worth every penny! Sturdiest build plate I've had on any of my printers. Gread job! Even heating and very easy to keep my build plate level.
Very even heating
This bed spreads heat perfectly. I will say that i was hoping since it was thicker aluminum that it would resist bowing with the springs but it does not so be aware of that. I added a bl touch to get around the bowing from how tight i have the bed, its a fantastic upgrade for the heat. I could have the bed flat if i loosened my springs to minimal tension but my nuts to hold the springs must have bad tolerance because they are very lose at that tension and continue to rotate over time so i had to tighten them more which bowed the bed.
This bed would have been 5 stars had it been cast aluminum. Still worth upgrading though.
Even heating, flat surface!
I'm very happy making this upgrade. My stock bed preformed pretty well but had a bit of a noticeable depression in the middle of the bed. This made leveling a bit challenging and I think caused some print failures, or at least some print errors (knocking over supports, spewing little bits of filament where the support was expected) on large prints that took up the whole build plate.
This bed is dead flat. Leveling the corners gives me consistent level across the plate. The plate being so much thicker and of a different material does take considerably longer to heat. I don't mind this as most prints I run are 10-150hrs. What's an extra 10min? I measured the heat with an infrared temperature probe and it's even across the bed. I did have to increase the bed temperature to 70C to get the actual surface of the Fulament PEI sheet to be around 60. But again, it's an even heat distribution.
NOT PERFRECT LEVEL, BUT HEAts all over, would recmedemed
awesome product. I recommand this bed. simply perfect for my sidewinder X1
I purchased the magnetic bed with heater for the Sidewinder X1. Also added the flex sheet as well.
All great products!
Make the machine so much better. The factory Glass bed is known for having a low spot in the center.
Also the new heater has a new setup that replaces the messed up cable protector that caused failures. The new one eliminates the notorious kink in the wiring.
Overall great setup for the X1 printer.
Worth every penny.
I was fortunate enough to get one in testing phase and did a video review (https://www.youtube.com/watch?v=DZChUhutKjE&t=1769s) Still running perfectly and has made getting a nice even level a breeze. Installation was easy and the heat gets spread evenly through the plate. Magnetic version has super strong field that will keep your favorite flex plate firmly in place. Well worth the investment and wait.