Sidewinder X1 Fula-Bed (Pre-Order) Build Plate Fulament
Sidewinder X1 Fula-Bed (Pre-Order) Build Plate Fulament
Sidewinder X1 Fula-Bed (More Details Coming soon) Build Plate Fulament
Sidewinder X1 Fula-Bed (Pre-Order) Build Plate Fulament

Sidewinder X1 Fula-Bed

Sale price $38.99 Regular price $129.99
Sold out

PRINT MORE. STRESS LESS.

Ever struggle with a warped bed? Or glass that doesn’t heat evenly?

Most FDM printing failures occur at the bed for these two exact reasons.

Stop worrying about your parts coming loose mid-print, and get back to focusing on printing. Fula-Bed was designed to finally solve these major bed problems that almost all stock beds have - lack of flatness & poor heating.

With Fula-Bed, you can say goodbye to your stock bed and finally:

  •  Print those 3 day long life-sized helmets with confidence.
  •  Fill up your build plate from edge to edge with parts.
  •  Print higher temperature materials with little warping.
  •  Fula-Bed completely redefines what you can do with your printer.

Fits:
Sidewinder X1

May Fit: 

Sidewinder X2

  • Fula-Bed will mount to the X2 correctly and make correct use of the flex plate pins. 
  • Fulament Upgraded Heater is not compatible with the X2
  • The strain relief tab will be in the incorrect position for the X2 
            Fulament Heater Upgrade:

            Fulament Heater Upgrade

            Fula-Flex 2.0:

            Fula-Flex 2.0

            Pickup currently unavailable at Fulament Warehouse

            Sidewinder X1 Fula-Bed

            None / None

            Fulament Warehouse

            Pickup currently unavailable

            100 Emerson Drive
            Staten Island NY 10304
            United States

            +13473990184

            3D Printing Has Never Been Easier Before

            Why Upgrade to Fula-Bed?

            Ultra-Flat

            With 0.10mm flatness, Fula-Bed makes it easy & enjoyable to print across the full bed

            Even Heat Distribution

            Designed specifically for each printer, Fula-Bed has built-in cable strain relief, ensuring your heater stands the test of time and built-in flex plate alignment pins, allowing you to line up your flex plate quickly

            High-Temperature Resistance

            Even at 150°C, Fula-Bed does not warp, giving you the certainty that your prints will not fail

            Sexy First Layers

            Most FDM 3D Printing failures happen at the bed. This is due to adhesion that can be caused by a lack of flatness.

            Lack of flatness means that some parts are too close to the bed (these stick well), and some are too far (which causes poor adhesion).

            This makes it very difficult to batch print with multiple parts across the full bed or even one large print that spans the entire bed.

            Fula-Bed is ultra-flat. This allows for easy & consistent leveling, giving you peace of mind.

            Focus On Printing, Not Getting Prints to Stick

            Fula-Bed surface distributes heat evenly, getting you an exceptional bed adhesion. So you can focus on picking sexy .STLs, not wasting time troubleshooting adhesion issues.

            One of the biggest causes of adhesion issues is uneven thermal heating. This is a common issue with glass, as it is not very thermally conductive.

            As you know, having certain parts of the bed cool releases prints. And in the case of glass, releases them pre-maturely.

            Our Fula-Bed + heater combo creates an extremely evenly heated surface, so you don’t have to worry about adhesion issues.

            FAQs

            Fits:

            Sidewinder X1

            May Fit: 

            Sidewinder X2

            - Fula-Bed will mount to the X2 correctly and make correct use of the flex plate pins. 

            - Fulament Upgraded Heater is not compatible with the X2

            - The strain relief tab will be in the incorrect position for the X2 

            Technical Specs Fula-Bed

            Flatness: 0.10mm

            Magnets: x55 N35UH

            Max Temperature: 150°C

            Anodization: Yes

            Grounding Cable: Yes

            Flex Plate Alignment Pins: Yes

            Built-in Strain Relief: Yes

            Free shipping on all U.S orders above $75. International shipping and customs fees are calculated at checkout. International orders may be subject to import duties and taxes, which the customer is 100% responsible for.

            30-Day risk-free, no questions asked returns on all products still in the original packaging across the US.

            Our #1 goal is to make sure you are a satisfied customer. Ever have a problem? Just reach out to our support team!

            Rest assured, we stand behind our products! We want you to be confident in each and every Fulament purchase knowing you are protected.

            Fulament products (except consumables) are warranted to be free from defects in material & manufacturing for one year from the original date of purchase when used under normal conditions and for the purpose intended. Click here to learn more about our Fulament Warranty

            - Heaters manufactured in the UK with strict quality control.

            - PTFE coated wires with 10 times longer bending life than silicone wires.

            - A thermal fuse incase of thermal runaway.

            - A ground cable to prevent electrical shock.