Kudo3D Bean Endstop Modification

Step 1

Printing the Endstop Spacer

The Hudo3D Bean doe not have enough z-height adjustment to compensate for the thickness of Fula-Flex, and a printable endstop extension will need to be printed.

Make sure to print and test the spacer before you install the magnet! Once installed, you cannot use your printer without the spacer.

Kudo3D Bean Endstop Spacer

Step 2

Installing the Spacer

Step 2.0/2.0

Remove the two screws securing the endstop located behind the screen

Re-Install the two screws with the new spacer sandwiched between the endstop and the frame

Now that the spacer is installed, we can move on to general installation.