Qidi S-Box Endstop Modification

Step 1

Printing the Replacement Trigger Arm

The Qidi S-Box does not have enough z-height adjustment to compensate for the thickness of Fula-Flex, and a printable trigger arm extension will need to be printed.

Make sure to print and test the spacer before you install the magnet! Once installed, you cannot use your printer without the spacer.

Qidi S-Box Trigger Arm Extension

Step 2

Install the Trigger Arm Extension

Add the printed trigger arm extension directly onto the trigger arm.

Make sure that this is a tight fit and won't come off over time!

Now that the spacer is installed, we can move on to general installation.